How to count stacked precast units from a single drone pass

Precast doesn't stack like pipe. A joint stack is pretty forgiving: same diameter, same length, bands you can count end-on. Precast vaults, box culverts, manholes, and median barrier sit in tiers of different footprints, sometimes with dunnage between layers, sometimes nested, sometimes just leaned against each other because the yard ran out of room. Walking that with a clipboard and trying to get a tier-by-tier count before quarter-end close is how you end up guessing, then defending the guess to your PM when the invoice says 140 units and your count says 118.
A single drone pass can get you most of the way to an actual number, but only if you understand what the camera can and can't see from the air.
Why a straight-down photo undercounts your stack
A nadir shot, the classic straight-down drone photo, is great for aggregate piles and terrible for tiered precast. From directly overhead, you see the top tier clean. Everything below it is hidden by the units sitting on top. If a stack is four vaults high, a nadir pass gives you a confident count of the top layer and nothing else. Project controls teams who've tried running a quick drone flight and counting from the ortho usually hit this wall fast: the photo looks great, the count is wrong, and nobody trusts it for the reconciliation.
The fix is flying an oblique pass alongside the straight-down one, so the camera catches the sides of each tier in the frame. Oblique coverage shows the stepped profile of a precast stack the way you'd see it walking up to it in person. That's what moves a count from "top tier plus a guess" to a tier-by-tier read across the pile.
What gets counted, and what still needs a person
Precast stacked tight, nested, or stored so one tier fully blocks the view of the tier below it from every angle the aircraft can fly is still a blind spot. No single pass, however it's flown, sees through concrete. A well-flown pass gives you a reliable count of everything visible from some angle in the imagery: top tiers, exposed sides, units set apart from the main stack, and the stuff stored loose at grade that never gets properly tallied because it's not in a "stack" at all. For yards that store in open-sided rows rather than tight blocks, which is most laydown yards doing turnover on a schedule, that covers the large majority of what's on site.
That's the number that matters for a reconciliation: a count you can put next to a delivery log and an invoice and check for agreement. A tier-by-tier count from imagery, flown weekly, gives you a number you can defend in the Monday meeting instead of a tally sheet from a walk you did two weeks ago, before the last three deliveries came in.
Setting up a yard for a countable pass
If your yard controls where precast gets stacked, you can make the count a lot cleaner before the drone ever launches. Stacking tiers in a step pattern, where each layer sets back slightly from the one below, keeps more of every tier visible from an oblique angle. Leaving a few feet of lane between stacks does the same thing. None of this requires rebuilding how your yard operates. It's the difference between a pile the drone can read and one where half the vaults just disappear into the stack.
Material Tracking turns a weekly flight over your yard into a counted record for precast, pipe, rebar, and stockpile volumes, built to sit next to your delivery log and invoice rather than replace your judgment about what's in the pile. If you're tired of reconciling a hand tally against a supplier's paperwork, take a look at what a weekly yard report looks like.